Skip to content

Spidercoordinator

A Spidercoordinator resource represents the global default configuration of the cni meta-plugin: coordinator.

There is only one instance of this resource, which is automatically generated while you install Spiderpool and does not need to be created manually.

Sample YAML

apiVersion: spiderpool.spidernet.io/v2beta1
kind: SpiderCoordinator
metadata:
  name: default
spec:
  detectGateway: false
  detectIPConflict: false
  hostRPFilter: 0
  podRPFilter: 0
  hostRuleTable: 500
  mode: underlay
  podCIDRType: auto
  podDefaultRouteNIC: eth0
  podMACPrefix: ""
  tunePodRoutes: true
  txQueueLen: 0
status:
  overlayPodCIDR:
  - 10.233.64.0/18
  - fd85:ee78:d8a6:8607::1:0000/112
  phase: Synced
  serviceCIDR:
  - 10.233.0.0/18
  - fd85:ee78:d8a6:8607::1000/116

Spidercoordinators definition

Metadata

Field Description Schema Validation
name The name of this Spidercoordinators resource string required

Spec

This is the Spidercoordinators spec for users to configure.

Field Description Schema Validation Values Default
mode The mode in which the coordinator. auto: automatically determine if it's overlay or underlay. underlay: coordinator creates veth devices to solve the problem that CNIs such as macvlan cannot communicate with clusterIP. overlay: fix the problem that CNIs such as Macvlan cannot access ClusterIP through the Calico network card attached to the pod,coordinate policy route between interfaces to ensure consistence data path of request and reply packets string require auto,underlay,overlay auto
podCIDRType The ways to fetch the CIDR of the cluster. auto(default), This means that it will automatically switch podCIDRType to cluster or calico or cilium. based on cluster CNI. calico: auto fetch the subnet of the pod from the ip pools of calico, This only works if the cluster CNI is calico; cilium: Auto fetch the pod's subnet from cilium's configMap or ip pools. Supported IPAM modes: ["cluster-pool","kubernetes","multi-pool"]; cluster: auto fetch the subnet of the pod from the kubeadm-config configmap, This is useful if there is only a globally unique default pod's subnet; none: don't get the subnet of the pod, which is useful for some special cases. In this case,you can manually configure the hijackCIDR field string require auto,cluster,calico,cilium,none auto
tunePodRoutes tune pod's route while the pod is attached to multiple NICs bool optional true,false true
podDefaultRouteNIC The NIC where the pod's default route resides string optional "",eth0,net1... underlay: eth0,overlay: net1
detectGateway enable detect gateway while launching pod, If the gateway is unreachable, pod will be failed to created; Note: We use ARP probes to detect if the gateway is reachable, and some gateway routers may warn about this boolean optional true,false false
detectIPConflict enable the pod's ip if is conflicting while launching pod. If an IP conflict of the pod is detected, pod will be failed to created boolean optional true,false false
podMACPrefix fix the pod's mac address with this prefix + 4 bytes IP string optional a invalid mac address prefix ""
podRPFilter set rp_filter sysctl for the pod int required 0,1,2;suggest to be 0 0
hostRPFilter (deprecated) set rp_filter sysctl for the node int required 0,1,2;suggest to be 0 0
hostRuleTable The directly routing table of the host accessing the pod's underlay IP will be placed in this policy routing table int required int 500
txQueueLen The Transmit Queue Length (txqueuelen) is a TCP/IP stack network interface value that sets the number of packets allowed per kernel transmit queue of a network interface device int optional >= 0, default to 0, it's mean to don't set it

Status (subresource)

The Spidercoordinators status is a subresource that processed automatically by the system to summarize the current state.

Field Description Schema Validation
overlayPodCIDR the cluster pod cidr []string required
serviceCIDR the cluster service cidr []string required
phase Represents the status of synchronization string required
reason the reason why the status is NotReady string optional